Multi-Segment Digit; Decimal Point - pigtronix Infinity Looper User Manual

Hide thumbs Also See for Infinity Looper:

Table of Contents

CHAPTER 2. ANATOMY AND FUNCTIONS

Multi-Segment Digit

This numeric display tells the user which preset is currently selected

(within the selected bank) and is also used to conﬁrm ﬁrmware update

"F", and to indicate copy in progress "C" and USB active "U" states.

In Varispeed mode (see page 35) a "-" is displayed. It's height repre-

sents the speed of the sample rate.

Located to the right of the digit, this LED lights up to indicate that

audio has been recorded to a preset bank. When changes have been

made to a preset but not saved, the decimal point will blink. Once

the changes have been saved, the decimal point will return to solid.

When a delayed command has been initiated, the relevant footswitch,

Arm, and Stop LEDs will blink repeatedly to indicate a pending action,

and will turn solid in color once the action is taken. At the end of the

loop cycle of the currently armed loop, the stop, multi-segment digit,

associated footswitch LED, and arm LEDs will all ﬂash. The other

(non-armed) loop's associated LEDs (Footswitch and A) will ﬂash at

the end of its loop cycle as well.

Table of Contents

Do you have a question about the Infinity Looper and is the answer not in the manual?