Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for pigtronix Tremvelope
Summary of Contents for pigtronix Tremvelope
- Page 1 Pigtronix Tremvelope User’s Guide All contents © Absara Audio LLC 2010...
- Page 2 Index: Welcome………………………………………………………… Anatomy of the Tremvelope.…………………………..……. Getting Started…..………………….…………………………. Guided Tour…………..………………………….……………… Limited Warranty……………………………………….…….… Safety Precautions………………………….,.…………….…..
- Page 3 The Tremvelope should be placed at or near the end of a pedal system. 18VDC power supply provides serious headroom to gracefully handle loud distortion pedals and other effects placed before it. Tremvelope accepts instrument or line level signals, so use it with any axe or even on a full mix.
- Page 4 Jacks: DC POWER 18-VOLTS – Use only the 18-Volt, 300mA, negative tip power supply that came with your Pigtronix Tremvelope. Using the wrong power supply is likely to result in a damaged pedal. IN – Effect input, Plug in your instrument here.
-
Page 5: Getting Started
Plug the power cord into the 18VDC jack on the back of the TREMVELOPE and then plug the power adaptor into an electrical socket. The TREMVELOPE is now powered up. To turn the device off, unplug it from the wall or turn off the power going to the 18VDC supply. - Page 6 Guided Tour: The following steps guide you through the sonic palette of the TREMVELOPE and show you how to get at the full range of tones it has to offer. Tremolo Controls Set all of the controls fully counter-clockwise and set all of the toggle switches to the right.
-
Page 7: Limited Warranty
TREMVELOPE chassis has been opened. Please consult the instructions and warnings in this manual for proper use. Warranty is only valid if your TREMVELOPE has been properly registered within 30 days of original purchase date, and upon warranty registration, will be valid for 12 months from original purchase. -
Page 8: Safety Precautions
300mA Adapter that came with your Pigtronix TREMVELOPE. DO NOT EXPOSE TO WATER/BEER – To reduce the risk of fire or electric shock, do not expose your TREMVELOPE to rain or moisture. If water gets inside the unit, turn off the power.
Need help?
Do you have a question about the Tremvelope and is the answer not in the manual?
Questions and answers