Advertisement
Quick Links
Advertisement
Related Manuals for pigtronix INFINITY 2
Summary of Contents for pigtronix INFINITY 2
- Page 1 INFINITY 2 User’s Guide All contents © Bond Audio LLC 2022...
- Page 2 CONTENTS Introduction Explanation of Controls Warranty Contact Information...
- Page 3 Many actions taken by the Infinity 2 occur at the loop boundary. This allows the musician to cue an overdub, switch between loops or stop at the end of a loop, without having to worry about hitting the footswitch at precisely the correct time.
-
Page 4: Explanation Of Controls
EXPLANATION OF CONTROLS... - Page 5 LOOP 2 FOOTSWITCH The pair of loops in the Infinity 2 are set to play in series for Verse/Chorus type arrangements. The Loop 2 footswitch controls the looping actions for Loop 2, and functions the same way as the Loop 1 footswitch (see above).
- Page 6 With the Decay knob set anywhere between those extremes, overdubbing on the Infinity 2 creates constantly evolving loop textures that can be instantly snapped back to a previous state using the Undo function.
- Page 7 STOP Press to Stop at the end of the loop cycle. Double-tap to Stop instantly. Press and Hold to fade out. Double-tap and Hold to Erase. Press STOP during initial record to prevent playback when recording is closed. ONCE Press to restart the current loop for single-shot playback. Press repeatedly for stutter.
- Page 8 Shorting both the TIP and the RING to the SLEEVE simultaneously will trigger the STOP function. We recommend that you use the Pigtronix Universal Remote switch with the Infinity 2. Plug your remote switch into the Undo jack using a 1⁄4” TRS cable.
- Page 9 ”Refresh List” then select Infinity 2 from the ”Hardware List” drop-down menu. Select the firmware to upload and then click the Update Firmware button. The unit will then automatically reboot with the new firmware loaded. DO NOT disconnect the power to the Infinity 2 during the firmware update process. RECORDING If there is no audio recorded on Loop 1, pressing the Loop 1 footswitch will begin recording immediately.
- Page 10 Deleting the loop that is not in use while recording on the other loop will cause the recording to close. WET / DRY ROUTING The dual outputs of the Infinity 2 can be routed for stereo output with clean pass-through and loop audio mixed together, or they can be configured for discrete Wet/Dry operation - where the loop audio is summed to Out 2, and clean pass-through audio is summed to Out 1.
-
Page 11: Pigtronix Limited Warranty
If your product is destroyed, lost or damaged beyond repair while in the possession of Pigtronix for repair, Pigtronix will replace that product with one of the same or most similar style of a value not in excess of the original purchase price of your pedal. Any insurance covering the pedal, including but not limited to collector’s value insurance, must be carried by you at your expense. - Page 12 FROM USE OR PERFORMANCE OF THE PRODUCT, WHETHER IN CONTRACT OR IN TORT, EVEN IF PIGTRONIX OR ITS AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND PIGTRONIX SHALL NOT BE LIABLE FOR ANY EXPENSES, CLAIMS, OR SUITS ARISING OUT OF OR RELATING TO ANY OF THE FOREGOING.
-
Page 13: Contact Information
CONTACT INFORMATION Address Bond Audio LLC 141 W 28th St, Floor 4 New York, NY, 10001 Phone 631-331-7447 Email info@pigtronix.com Warranty Service Email support@pigtronix.com Warranty Contact Form pigtronix.com/warranty Website pigtronix.com YouTube youtube.com/pigtronix Product manuals are offered digitally in an attempt to be mindful of our environment.
Need help?
Do you have a question about the INFINITY 2 and is the answer not in the manual?
Questions and answers