Out 2; Aux Out; Undo; Expression - pigtronix Infinity Looper User Manual

CHAPTER 2. ANATOMY AND FUNCTIONS 13

Out 2

Second pass-through/loop output, for use when you're using stereo
inputs, or two instruments, or want to split your output signal (one to
an amp, one to a recording unit, for example).

Aux Out

This output contains summed mono audio of all currently playing
loops. This output is primarily intended for use as a loop only monitor
send to a drummer, bandmate or FOH mixer.

Undo

Connect a dual momentary remote switch here using a TRS (balanced
1/4") cable (not an instrument or speaker cable!) to enable Overdub,
Undo, Redo, Reverse, and Varispeed.
We recommend the Infinity Remote: www.pigtronix.com/products/
infinity-remote-switch.
For details on how to use the remote switch, please see Remote Switch
Functions, page 33.

Expression

This is the TRS (balanced 1/4") input for an expression pedal that
can be used for three different purposes: audio level control of both
loops simultaneously, Loop Aging, or Varispeed.