Table of Contents
Advertisement
You can clear CMOS by shorting 2-3 pin. Before you clearing the CMOS, following
next procedure:
1. Shut down your computer
2. Pull out the ATX power cable
3. Shorting 2-3 pin 3 seconds
4. Then shorting the 1-2 pin
5. Connect the ATX power connector again
Keyboard Power on: JKB
NOTE: You need clear CMOS when
in next instance
1. When you forget your CMOS
password.
2. When over-clocking is failed.
Keep Data
Clear Data
Advertisement
Table of Contents
Need help?
Do you have a question about the C.945PL and is the answer not in the manual?