Page 21
BIOS 劶靨 癋啈狾寷 娃 嬽 ADVANCED BIOS SETTING LANGUAGE EXIT 粚 August 2020/08/14 FAN PROFILE System Information Model: CVN B460I GAMING V20 CPU Temperature +31℃ CPU Voltage:0.916V CFAN1 CFAN2 CPU: Intel(R)Core(TM)i5-10400F 2319 RPM 0 RPM CPU@2.90GHz Total Memory:4096MB(DDR4) Memory Motherboard Voltage:1.265V...
Page 22
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 ADVANCED BIOS SETTING LANGUAGE EXIT August 2020/08/14 CPU OverClocking Frequency Temperature Configuration Intel(R)Core(TM)i5-10400F CPU@2.90GHz 2892.19MHZ +31℃ BCLK Frequency Memory 99.780MHZ Configuration Ext.Frequency Voltage CPU Flex Ratio Override Disabled 100.00MHZ 0.916V Over Voltage...
Page 25
BIOS 4-3-1 Advanced BIOS Onboard Devices 缟 撆 Onboard LAN Controller 炏岔痰堟 缟 ⼦硹奓怸ㄌ 樾嗥繟 Disabledㄋ Enabledㄌ PXE Boot Rom 炏岔痰堟 PXE 炴欈 ROM 岔娐ㄌ 樾嗥繟 DisabledㄋUEFIㄋLegacyㄌ HD Audio Controller 炏岔痰堟 詙 硹奓怸ㄌ 樾嗥繟 DisabledㄋEnabledㄌ HDMI Codec Control 炏岔痰堟 HDMI 硹奓怸ㄌ...
Page 26
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 USB KB/MS Wakeup Function 騰/ 翶巿 娃 ㄌ 樾嗥繟 Disabledㄋ Enabledㄌ Wake By Lan 巿 ㄌ 樾嗥繟 Disabledㄋ Enabledㄌ Power On By PS/2 Keyboard PS/2 騰巿 ㄌ 樾嗥繟 DisabledㄋAnyKey 叟琍 ㄋPassword 檖...
Page 27
BIOS Active Processor Cores 赠褙撁锐怸聈燭劝箤ㄌ C states 炏岔痰堟 CPU C 錆牒娃 ㄌ 樾嗥繟 DisabledㄋEnabledㄌ SATA Configuration SATA SATA Controller(S) 炏岔痰堟 SATA 硹奓怸ㄌ 樾嗥繟 EnabledㄋDisabledㄌ SATA Mode Selection SATA 硵尞馯溤呮莲炩ㄌ 樾嗥繟 AHCIㄋRAID/Optaneㄌ M.2 SATA 納鸏 M.2 SATA 硵尞馯 硵錆牒ㄌ SATA 1-4 納鸏...
BIOS 壽 Exit 壽 媨睉 狦撑 /唾榵澃 岔/割唾榵澃 壽ㄌ ADVANCED BIOS SETTING LANGUAGE EXIT August 2020/08/14 EXIT Options Frequency Temperature +31℃ 2892.19MHZ Voltage Ext.Frequency 100.00MHZ 0.916V Load Optimized Default MEMORY Frequency Voltage Save Changes&Reset 2133MHZ 1.265V Login Micro Blog Scan QRC Code Discard Changes&Exit @七彩虹科技...
Chapter 5 English Introduction 5-1 Introduction Thanks for purchasing Colorful motherboard which provides excellent performance and quality assurance. Package Contents 1* CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 Motherboard 2* SATA 6Gb/s cables 1* Driver/Utility disk 1* User's Manual...
Page 33
Introduction Tips:when using 95W processor, please match the professional CPU cooling fan! Memory Offer 2 DIMM slots,support XMP memory and DDR4 dual channel Support DDR4-2933/2800/2666/2400/2133 MHz memory the maximum supported capacity of a single memory slot is 32GB, and the total memory capacity is 64GB Warm tip: the frequency of memory overclocking also depends on the performance of matching CPU and memory itself! Slots...
Hardware Installation 5-2 Hardware Installation This section will guide you through the installation of the motherboard. The topics covered in this section are: Preparing the motherboard Installing the CPU Installing the CPU fan Installing the memory Installing the motherboard Connecting cables and setting switches 5-2-1 Safety Instructions To reduce the risk of fire, electric shock, and injury, always follow basic safety precautions.
Page 36
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 There are many different fan types that can be used with this motherboard. Follow the instruction that came with you fan assembly. Be sure that the fan orientation is correct for your chassis type and your fan assembly.
Page 37
Hardware Installation One DIMM: Install into DIMM1. You can install the DIMM into any slot, however, slot 1 is preferred. 2 DIMMs: Install into DIMM1&DIMM2 slot, to build dual channelㄌ. Use the following procedure to install memory DIMMs into the slots on the motherboard.
Page 38
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 Installing the I/O Shield The motherboard kit comes with an I/O shield that is used to block radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis.
Page 39
Hardware Installation Serial ATA 3.0 6Gb/s connectors (7-pin) These connectors connect to Serial ATA 3.0 6Gb/s hard disk drives and optical drives via Serial ATA 3.0 6Gb/s signal cables. USB3.2 Gen1 Type-A connectors This connector is for USB3.2 Gen1 devices.These USB connectors can up to 5Gb/s connection speed,can be downwards compatible with USB2.0/ 1.1 devices.
Page 40
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 USB2.0 connectors These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with the USB 2.0 specification that supports up to 480Mbps connection speed.
Page 41
Hardware Installation Front panel audio connector This connector is for a chassis-mounted front panel audio I/O module that supports either High Definition Audio or AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.
Page 42
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 HD_LED:Hard disk drive activity LED This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.
Page 43
Hardware Installation PCI Express Slot The PCI Express x16 slot is reserved for a graphics or video card.The bandwidth of the x16 slot is up to 4GB/sec (8GB/sec concurrent). When installing a PCI Express x16 card, be sure the retention clip snaps and locks the card into place.
Page 44
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 Please install M.2 SSD correctly in the slot following the following steps: 1. please use a screwdriver to remove the screws and studs in order, and then lock the stud first when the actual M.2 SSD is found to be suitable for the screw hole position.
Page 45
Hardware Installation WIFI/BT module slot: The motherboard has one WIFI/BT module slot,equipped with Intel AX200 WiFi6 wireless card. PS2 mouse/keyboard wake up header(JPS2) To turn on the ps2 mouse / keyboard wake-up function, the jumper cap should be placed on pin pin2-3, and the ps2 mouse / keyboard wake-up function should also be turned on in BIOS settings.
Page 46
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 Clear CMOS Jumper: There is a CMOS RAM on board that has a power supply from external battery to keep the system configuration data. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, use the CLR_CMOS Jumper to clear data.
Page 47
Hardware Installation Back Panel IO Connector AUDIO WIFI USB3.2 Gen1 Type-A USB2.0 HDMI USB3.2 Gen1 USB3.2 Gen1 Type-C Type-A Parts PS/2 Mouse/ Keyboard This connector is for a PS/2 mouse/Keyboard. Connector LAN Jack The standard RJ-45 jack is for connection to single Local Area Network (LAN).
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 5-3 Driver Installation The drive disc can automatically detect the chipset model, sound card model, on-board video card model or on-board network card model used by the main board, and click the corresponding button to install the corresponding driver.
Page 49
BIOS Setting system parameters and loading operating system, etc.When computer startup, and then enter the boot self test (POST) program, if there are any errors will be shown the following information: Press F1 to enter Setup Press F2 to Load default values and continue (Press the <F1>...
Page 50
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 Function menu Fan info and setting System ADVANCED BIOS SETTING LANGUAGE EXIT date August 2020/08/14 FAN PROFILE System Information Model: CVN B460I GAMING V20 CPU Temperature +31℃ CPU Voltage:0.916V CFAN2 CFAN1 CPU: Intel(R)Core(TM)i5-10400F...
Page 51
BIOS Setting CAUTION:Because the BIOS version of the motherboard is constantly upgraded, the BIOS description in this manual is for reference only. CPU OverClocking Configuration CPU Flex Ratio Override Set turn on or off CPU Flex Ratio Override. Options: Disabled, Enabled. CPU Non-Turbo Ratio Settings Set CPU Non-Turbo Ratio value.
Page 52
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 Memory Frequency Set memory frequency. CAS Latency Time (tCL) This controls the latency of the C A S, which determines the delay time (in the time cycle) when the SDRAM starts reading after the receive command.
Page 53
BIOS Setting can be activated faster and read and write. However, due to the need for a certain amount of data, too short delay will cause continuous data expansion. For desktop computers, it is recommended that the TRRD value be set to two clock cycles, which is the best setting when data expansion can be ignored.
Page 54
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 5-4-3-1 Advanced Advanced BIOS Features Onboard Devices Onboard LAN Controller Select to open or close the onboard network card controller. Options: Disabled and Enabled. PXE Boot ROM Select to open or close PXE Boot ROM.
Page 55
BIOS Setting Front USB Power Turn on or off the charging function of the front USB ports in the power off state.Options: Disabled, Enabled. Rear USB Power Turn on or off the charging function of the real USB ports in the power off state.Options: Disabled, Enabled.
Page 56
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 ACPI Sleep State Select the standby mode under OS. Options: Suspend Disabled, S3 (Suspend to RAM). CPU Configuration Intel VMX Virtualization Technology Set to open or close the Intel virtualization technology. Intel virtualization...
Page 57
BIOS Setting XHCI Hand-off This project is used to start an operating system that supports no "XHCI hand-off" functionality. Options: Disabled, Enabled. USB Mass Storage Driver Support Set USB to support large capacity memory. Options: Disabled, Enabled. USB transfer time-out This option sets the longest time for a data transmission on the USB2.0 bus.
Page 58
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 IGFX Memory Size Set IGFX Memory Size.Options:32Mㄋ64Mㄋ128Mㄋ256Mㄋ512Mㄋ1024M. DVMT Total Gfx Mem Set the total capacity of shared memory of integrated graphics card. Options:128MBㄋ256MBㄋMAX. ME Configuration ME Control Set to open or close the ME firmware.
Page 59
BIOS Setting 5-4-3-5 Password Setting Administrator Password This project is used to set the system administrator password. Please follow these steps: 1.Select"Administrator Password"and press the "Enter" button. 2. When"Greate New Password"appears enter the password you want to set, which can be in six bytes in English, numbers and symbols, and then press the "Enter"...
Page 60
CVN B460I GAMING V20/CVN B460I GAMING FROZEN V20 5-4-4 BIOS setting upgrade BIOS Options include: upgrade BIOS from U disk, backup original BIOS to U disk, download and upgrade BIOS from network.Before upgrading BIOS, turn off ME control and BIOS write protection options in BIOS.
Page 61
BIOS Setting 5-4-6 Exit exit Settings The exit options include restore default / save and restart / do not save and exit. ADVANCED LANGUAGE BIOS SETTING EXIT July 2020/07/03 EXIT Options Frequency Temperature 2892.19MHZ +31℃ Voltage Ext.Frequency 100.00MHZ 0.916V Load Optimized Default MEMORY Frequency Voltage...
Page 62
The material in this document is the intellectual property of Colorful Technology and Development CO, LTD. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Page 63
Or our engineer, send the follow information to us! Customer name Purchase date Contacts Contact phone Contact address Product model Product SN Dealer name Dealer phone Dealer address Website: www.colorful.cn Service hotline: +86400-678-586...
Need help?
Do you have a question about the CVN B460I GAMING V20 and is the answer not in the manual?
Questions and answers