Three Phases Input; Common Sources; Separate Sources - MGE UPS Systems Pulsar MX Frame 15000 RT Installation And User Manual

2. Installation

Three phases input

This type of connection must be carried out by qualified electrical personnel

Common sources

Separate sources

- Page 25
34008486EN/AA
1 - Remove the one-phase metal strap (1)
2 - Be sure that the metal jumper (2) is
installed
3 - Connect the 5 cables to the normal AC
source terminal block
4 - Connect the 3 cables to the output
terminal block
5 - Remove cover and put input selection
selector (3) to three phase position.
1 - Remove the one-phase metal strap (1)
2 - Remove the metal jumper (2)
3 - Connect the 5 cables to the normal AC
source terminal block
4 - Connect the 3 cables to the bypass AC
source terminal block
5 - Connect the 3 cables to the output
terminal block
5 - Remove cover and put single phase or
three-phase switch selection (3) to three-
phase position.