Printer States - CAB EOS1 Operator's Manual

14 3 Control Panel

3.4 Printer States

State
Ready
Printing Label
Pause
Correctable
error
Irrecoverable
error
Critical error
Power Save
Mode
Table 2
Display
Ready
Printing Label
and the number of the
printed label in the print
job.
Pause
and the symbol
and the type of error
and the number of labels
still to be printed,
display flashes red.
and the type of error
and the number of labels
still to be printed,
display flashes red.
Critical fault
and the type of error,
display flashes red.
Printer States
Description
The printer is in the ready state and
can receive data.
The printer is currently processing
an active print job.
Data can be transmitted for a new
print job.
The new print job will start when the
previous one has finished.
The printing process has been
interrupted by the operator.
An error has occurred that can be
rectified by the operator without
interrupting the print job.
The print job can be continued after
the error has been rectified.
An error has occurred that cannot
be rectified without interrupting the
print job.
An error occurs during the system
test.
 Switch the printer off and then
on again at the power switch.
Call Service if the fault occurs
persistently.
If the printer is not used for a
lengthy period, it automatically
switches to power save mode.
 To exit power save mode: Touch
touchscreen display.
15 14