Table of Contents
Advertisement
Multiple handset use
Intercom
Use the intercom feature for conversations between two system handsets.
You can buy additional expansion handsets (AT&T model TL90031/TL90041/
TL90051/TL90061, sold separately) for this telephone system. You can
register up to 12 handsets to the telephone base.
To initiate an intercom call:
1.
Press
MENU
2.
Press CID or
press SELECT.
•
If you have two handsets, your handset displays
Calling other handset. The destination handset rings
and displays Other handset is calling.
•
If you have three or more handsets, your handset
displays INTERCOM and a list of registered handsets.
Press CID or
and then press SELECT. Your handset displays
Calling HANDSET X, or Calling all handsets when
you choose All handsets.
-OR-
Press 1-9 for HANDSET 1-9, TONE
TONE
Your handset displays Calling HANDSET X. The other handset rings
and displays HANDSET X is calling.
-OR-
Press TONE
The destination handset(s) rings and displays HANDSET X is calling, or
HANDSET X is calling all when you choose all handsets.
To answer an intercom call at the destination handset:
HOME/
•
Press
on the handset in idle mode.
DIR to highlight Intercom, then
DIR to select a destination handset
and 1 for HANDSET 11 or TONE
and then # (pound key) to call all handsets.
/SPEAKER. Both handsets show Intercom.
or
FLASH
and 0 for HANDSET 10,
and 2 for HANDSET 12.
50
Answering sys
Directory
Cal ler ID log
Intercom
BACK
SELECT
INTERCOM
HANDSET
2
HANDSET
3
Al l handsets
BACK
SELECT
Advertisement
Table of Contents
