Multiple handset use
Push-to-talk (PTT)
End a PTT call
•
For a one-to-one PTT call, both the originating and destination handsets
can end the PTT call.
•
For one-to-group PTT calls, the initiating handset can end the PTT call
for the group of handsets on that PTT call. If any one of the destination
handsets leaves the PTT call, the call continues until all participants or the
initiator hangs up.
To end or leave PTT:
Press
OFF/
CANCEL
The handset displays Push to talk Ended.
NOTES: After PUSH TO TALK is released, the PTT call remains open for a short time. If no
one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
Answer an incoming call during PTT
When you receive an incoming outside call during PTT, there is a call waiting
tone. The caller ID is displayed with PTT screen, alternately.
•
During a one-to-one PTT call, press
originating or destination handset. The PTT call ends automatically and the
outside call is answered.
•
During a one-to-group PTT call, press
the originating handset. The PTT call ends automatically and the outside
call is answered.
•
During a one-to-group PTT call, press
any one of the destination handsets and that handset answers the outside
call. The PTT call continues for the rest of the PTT participants.
•
To leave the PTT call without answering the incoming call, press
OFF/
CANCEL
Make an outgoing call during PTT
•
During a one-to-one PTT call, press
a dial tone. The PTT call ends automatically.
•
During a one-to-group PTT call, press
the originating handset. The PTT call ends automatically and you get a
dial tone.
•
During a one-to-group PTT call, press
any one of the destination handsets and that handset gets a dial tone. The
PTT call continues for the rest of the PTT participants.
or place the handset in the telephone base or charger.
. The telephone continues to ring.
HOME/
FLASH
HOME/
FLASH
HOME/
FLASH
HOME/
FLASH
HOME/
FLASH
HOME/
FLASH
57
or
CELLULAR on the
or
CELLULAR on
or
CELLULAR on
or
CELLULAR to get
CELLULAR on
or
or
CELLULAR on