Table of Contents
Advertisement
Answering system
Answering system settings
Answer on/off
If you turn the answering system on, it answers calls and records messages
only on the home line. If your paired cell phone has voicemail, callers can
leave messages with that voicemail service.
If your answering system is turned off and you change any of its settings,
the answering system automatically turns on again and the handset displays
Calls will be answered.
When the answering system is turned on, the
light on the telephone base is on and the handsets display
ANS ON.
To turn the answering system on or off:
Using the telephone base:
/ANS ON to turn the answering system on or off. When the answering
Press
system is turned on, it announces, "Calls will be answered." When the
answering system is turned off, it announces, "Calls will not be answered."
NOTES:
•
If there is no remaining recording time, the answering system announces "Calls will not
be answered." and cannot be turned on.
•
If the total recording time is less than three minutes, the answering system announces
"Less than three minutes to record." and your handsets display Rec mem low.
•
If the answering system is off, you may press
on the answering system during an incoming call. The answering system answers the
call immediately if there is remaining time.
Using a handset:
MENU
1.
Press
main menu.
2.
Press CID or
press SELECT.
3.
Press CID or
press SELECT.
4.
Press CID or
SET
to save. You hear a confirmation tone.
on the handset in idle mode to enter the
DIR to highlight Answering sys, then
DIR to highlight Answer ON/OFF, then
DIR to highlight On or Off, then press
/ANS ON
/ANS ON on the telephone base to turn
73
Play messages
Answering sys
Directory
Cal ler ID log
BACK
SELECT
ANSWERING SYS
Delete al l old
Record memo
Answer ON/OFF
BACK
SELECT
ANSWER ON/OFF
On
Off
BACK
SET
Advertisement
Table of Contents
