Table of Contents
Advertisement
Appendix
Screen messages
Other handset
is calling
(For models with two handsets only)
Out of range
OR
No power at
base
** Paging **
Place
in charger
PTT From
HANDSET X
To
handset Y
PTT To
HANDSET X
Push to talk
Ended
Put handset
on BASE
to register
Rec mem full
Ringer muted
Rec mem low
Registration
slots are full
Saved
Unable to save
XX Missed calls
XX New messages
The other handset is calling.
The handset has lost communication with the
telephone base.
There is no power connected to the telephone base.
The telephone base is paging all handsets.
The battery is very low. The handset should be placed in
the telephone base or charger.
One handset has started a PTT session to another
handset.
You have started the PTT process.
The PTT session is ended.
Your handset is not registered to the telephone base.
The answering system has no recording time left.
The ringer is muted temporarily during an incoming call.
The answering system has less than three minutes
to record.
The telephone base already has the maximum of 12
handsets registered to it.
The entry is now saved in the directory.
You are trying to save an entry with no name and
number from the caller ID history.
There are new calls in the caller ID history.
There are new messages recorded in the answering
system.
92
Advertisement
Table of Contents
