Epson Runsense SF-710 User Manual page 27

SF-710/510/310 User Manual
F
Set today's date.
Use C/D to select, and then press A.
G
Set the Date Format.
Use C/D to select, and then press A.
H
Go to a location outside with no
obstructions overhead.
c
Important:
Take the following steps to receive a signal
from the GPS and synchronise time
automatically. Since the signal from the
GPS cannot be received indoors, go
outside to a location without any
obstructions overhead.
Preparing and Basic Operations
I
Note:
❏ When you leave the device for a while, it enters sleep
❏ If time synchronisation fails, the signal from the GPS
27
Complete the settings.
Use C/D to select Yes, and then press A.
A signal is received from the GPS and time is
automatically synchronised.
When Complete is displayed, press A.
The time screen is displayed.
status and the time display turns off. This is not a
malfunction as the display is restored the next time
you move the device.
may not be being received properly. Perform Time
Adjust from Sys. Settings.
"Sys. Settings" on page 113
U