Epson Runsense SF-710 User Manual page 126

SF-710/510/310 User Manual
A
Display the measurement screen.
Use one of the following methods to display.
❏ When performing GPS positioning:
Press C on the time screen.
❏ When skipping GPS positioning:
Press C on the time screen, and then select
Skip on the GPS positioning screen.
"Skipping GPS positioning" on
U
page 30
❏ When not performing GPS positioning
(Indoor mode: SF-710/SF-510 only):
Hold down C on the time screen.
"Indoor mode (SF-710/SF-510 only)"
U
on page 31
B
Display the Measure set. menu.
Hold down B on the measurement screen.
C
Select Screen.
Use C/D to select, and then press A.
Settings
D
Select Display Lap Screen.
Use C/D to select, and then press A.
E
Select 1 Line.
Use C/D to select, and then press A.
Screen Image is displayed. Lap Distance is
displayed by default.
After checking, press A and go to the following
step.
F
Select Line 1.
Use C/D to select, and then press A.
126