Epson Runsense SF-710 User Manual page 120

SF-710/510/310 User Manual
Display item
Average Pitch*3
Lap Pitch*3
HR
Average HR
Maximum HR*3
Lap HR
Steps*3
Lap Steps*3
HR Zone Time*3*4
Time to HR Zone*3*4
Total Ascent*1*5
Total Descent*1*5
Grade*1*5
Latitude/Longitude*3*6
Estimated Time*7
Estimated Distance*7
*1 Altitude, Total Ascent, Total Descent, and Grade are calculated using the GPS signal. These functions may
contain larger errors when compared to the accuracy of position and distance depending on the GPS
environment.
*2 Set the Target Pace in the Measure set. menu.
"Setting a Pace and Measuring (Target Pace Function)" on page 57
U
*3 Only displayed for the SF-710/SF-510.
Settings
Display name
1 Line 2 Lines/3 Lines
Avg.Pitch Av.Pitch
LapPitch LapPitch
HR HR
Avg.HR Av.HR
Max.HR Max.HR
LapHR LapHR
Steps Steps
LapSteps LapStp
Spent.HR Spent.HR
Time.HR Time.HR
TotalAscent Tot.Asc.
TotalDescent Tot.Des.
Grade Grade
LAT/LONG LAT/LONG
Est.Time Est.
Est.Dist. Est.Dist.
120
Explanation
Average pitch from the start of
measurements
Average pitch for each lap
Current heart rate
Average heart rate from the start of
measurements
Maximum heart rate from the start of
measurements
Average heart rate for each lap
Number of steps from the start of
measurements
Number of steps for each lap
Time within heart rate zone for each
lap set by the Interval function
Time to reach the heart rate zone for
each lap set by the Interval function
Total ascent from the start of
measurements
Total descent from the start of
measurements
Current Grade
Current Latitude/Longitude
Estimated time of arrival at the
target distance set in the goal
function
Estimated distance reached at the
target time set in the goal function