Pairing Your Device Via Bluetooth - iHome iBT290 Instruction Manual

Pairing Your Device Via Bluetooth

Whenever AC power is connected, the iBT290 will attempt to autolink to a previously
paired device.
1. Turn on your Bluetooth device and make it "discoverable" by turning
2. Press the
3. Press the Mode Button to cycle to Bluetooth mode, indictaed by "BT"
4. Press and hold the
5. If pairing is successful, "PAIRED will appear on the display,2 beeps will sound and the
cabinet will flash blue twice, indicating the iBT290 is ready to play music. There should
also be an indication on your device. If no device is successfully paired within 3 minutes
the iBT290 will default to previous mode. Once the iBT290 is paired to a device, it will
attempt to autolink when the device is within range (about 33 feet).
on Bluetooth mode (check in Options or Settings).
Button to turn on the iBT290.
on the display"
seconds. The iBT290 will beep and "PAIR" will flash on the display,
indicating the iBT290 is in pairing mode.
"iHome iBT290" should appear in your device's Bluetooth menu.
Select "iHome iBT290" to connect it. If prompted for a passcode, enter
"1234" on your device's keypad.
Using the
Pairing Button on top of the iBT290 for 2
11
iBT290