Using Bluetooth: Pairing & Playing Your Device Using Nfc - iHome iBN18 Instruction Manual

Using Bluetooth:
Pairing and Playing Your Device Using NFC
This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play
instantly. For pairing non-NFC devices, please see the following section "Pairing Your Device Using
Standard Bluetooth".
1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on both Bluetooth capability and NFC
capability as described in the device's user manual.
2. Place your NFC–enabled device in play mode.
3. Touch the NFC area of your playing device against the NFC antenna on top of the unit. The unit will
turn on and enter automatic pairing mode, tones will sound and Bluetooth indicator icon will flash while
the unit attempts to pair. "iHome iBN18" should appear on your device's menu. Once paired with a
device, the Bluetooth indicator on the display will stop flashing, then the Bluetooth icon will remain and
a confirmation tone will sound and your music will play through the unit. The Bluetooth wave icons will
appear, indicating streaming Bluetooth audio mode.
4. Use the controls on your device to play or pause audio and navigate tracks.
5. Press the or Buttons to adjust the volume on the unit. You can also adjust volume on your device.
6. When done listening, press the
too.
NOTE: To disconnect your device, simply touch it again on the NFC antenna on top of the unit. To pair a
device manually, please see the following "Pairing Your Device Using Standard Bluetooth" section.
Button to turn the unit OFF. Remember to turn off your audio device,
11
iBN18
Using the
P12