Pairing Your Bluetooth Device - iHome iBTW38 Instruction Manual

Pairing Your Bluetooth Device

When AC power is connected, and the
the iBTW38 will announce "Looking for Bluetooth Signal" and attempt to autolink to a
previously paired device.
1. Turn on your Bluetooth device and make it "discoverable" by turning
2. Press the
3. Press and hold the
2s
iHome
iBTW38
4. "iHome iBTW38" should appear in your device's Bluetooth menu. Select
"
5. If pairing is successful, the iBTW38 will announce "Connected" and the Bluetooth
will appear solid, indicating the iBTW38 is ready to play music. There should also be an
indication on your device. If no device is successfully paired within 3 minutes the iBTW38
will default to previous mode. Once the iBTW38 is paired to a device, it will attempt to
autolink when the device is within range (about 33 feet).
on Bluetooth mode (check in Options or Settings).
Button to turn on the iBTW38. The first time the unit is
powered on it will enter pairing mode automatically. After this, you
will need to pair using the Pairing Button after powering on (see step
3 below).
seconds. The iBTW38 will announce "Pairing" and the Bluetooth
will flash on the display, indicating the iBTW38 is in pairing mode.
"iHome iBTW38" to connect device. If prompted for a passcode, enter
"1234" on your device's keypad.
Button OR or Bluetooth Button is pressed,
Pairing Button on top of the iBTW38 for 2
8
iBTW38
Using the
icon
icon