Maintenance; Cleaning The Inlet Filter - Kohler Electric Shower Installation And User Manual

Any maintenance must be carried out by a qualified tradesperson, following the
instructions provided. Before replacing any parts, ensure that the underlying cause of
the malfunction has been resolved.
WARNING! There are no user-serviceable components beneath the cover of the
appliance. Only a competent tradesperson should remove the cover.
Cleaning
Many household and industrial cleaners contain abrasives and chemical substances
that can damage the finish of your shower. Only clean the shower and fittings with a
mild washing-up detergent or soap solution, and then wipe them dry with a soft cloth.

Cleaning the Inlet Filter

WARNING! Isolate the electrical and water supplies before removing the cover.
1. Remove the three screws that hold the cover on the shower and remove the
cover.
2. Remove the service tunnel from the shower.
Service Tunnel

Maintenance

Cover
30
Screws
Screw