Fuel Injection System - All Models - ILMOR MV-10 Owner's Manual & Installation Manual

Fuel Injection System – All Models
WARNING
All fuel system plumbing must be in accordance with US Coast Guard (USCG) regulations
using hose which meets or exceeds SAE Standard J1527DEC85.
All hose used for fuel delivery must meet or exceed specification in USCG regulations
sec.183.540 for recreational boating.
WARNING
The fuel pump supplies fuel to the engine a regulated pressure (see
Listing). Great care must be taken with all items in the fuel system to avoid leaks. Leaks
could lead to a gasoline fire in the engine compartment. All lines and fittings used in
the fuel system must meet or exceed the USCG requirements for fuel systems.
Each MV10 is supplied with a complete fuel delivery system installed.
include: fuel pump, water separator fuel filter and fuel pressure regulator with high
pressure fuel filter. A ½" I.D. supply line must be plumbed from the fuel tank to the input of
the water separator and a
the fuel tank. Warranty coverage may be denied if fuel supply line smaller than ½" I.D. or
fuel return line smaller than
system installation, immediate technical assistance is available from ILMOR Marine
Engines by calling (734) 456-3600 or e-mail: sales&service@ilmor.com
All fuel system components supplied with the MV10 have been selected for best
performance. Failure to use the supplied components could lead to engine failure or
possibly fire. Use of non-ILMOR supplied components is done entirely at the owners' own
risk. Warranty coverage may be denied if the engine(s) are modified in any way, by any
person after delivery by
unless such modification or use of parts is requested and approved by ILMOR in writing.
Please call ILMOR Marines Engines before altering the fuel delivery system in any
way.
3
/ " I.D. return line (on return fuel systems) must be run back to
8
3
/ " I.D is used. Should you have any questions regarding fuel
8
ILMOR, including the use of non-ILMOR specified service parts
Owner's Manual &
Installation Instructions
Revision 6e
MV10 Service Parts
Components
Page 13