Engine Specifications - ILMOR MV-10 Owner's Manual & Installation Manual

Engine Specifications

Required Fuel Octane
Engine Coolant
Engine Oil
Power Steering Fluid
Recommended Engine Speed
Spark Plugs
Normal Oil Pressure
Normal Fuel Pressure
Normal Coolant Temperature
Normal Oil Temperature
Normal Battery Voltage
550, 570, 625, and 7-10 models
91 (R + M)/2 Minimum
Mopar 5 Yr/100,000 mile formula antifreeze
(MS-9769) (50/50 mix)
550, 570, and 625 models
15W50 Mobil 1® Synthetic
7-10 model
0W40 Mobil 1® Synthetic
Dextron III / Mercon ATF
550 model
5300-5800 RPM (5900 RPM limit)
570 model
5250-5750 RPM (5800 RPM limit)
625 model
5400-6000 RPM (6100 RPM limit)
7-10 model
5600-6200 RPM (6300 RPM limit)
550, 570, and 625 models
RC12ECC (0.035"-0.038" gap)
Champion:
7-10 model
ZFR6F-11G (0.038"-0.042" gap)
NGK:
70 – 75 psi @ idle with warm oil
550, 570, and 625 models
55 psi (nominal)
7-10 model
72 psi (nominal)
155 – 180º F
150 – 230º F
14.0 – 14.5 Volts when running
Owner's Manual &
Installation Instructions
Revision 6e
Page 50