Table of Contents
Advertisement
2.1
A Quick Tour of IPPC-9151G/9171G
Before you start the computer, please follow these procedures to set up the system.
1.
Connect the wires, cables and accessories.
2.
Mount the computer.
3.
Install an operating system.
Warning!
1.
2.
1.
Unscrew the six screws.
2.
Remove the rear cover, refer to the below figure.
Power button GND
Power
connector
IPPC-9151G/9171G User Manual
Switch off and unplug the computer every time you access its inte-
rior.
The motherboard inside the system is composed of many delicate
ICs, chips and other integrated circuit components. These compo-
nents are easily damaged by static shock.When you begin to install
components:
- Avoid touching metal parts of the motherboard.
- Wear an anti-static ring when handling a CPU or SDRAM module.
- Put SDRAM modules and the CPU inside an anti-static bag or a
similar place before installation.
COM3
COM4
Mouse
COM1
Keyboard COM2 HDMI
Line in & Line
LAN
out & Mic
USB
8
PCIe
CFast
Advertisement
Table of Contents
