Second Paper Feed Unit Boards And Connectors - OKIDATA DOC-IT3000 Service Manual

3.2.59 Second Paper Feed Unit Boards and Connectors

· Squeeze the clamps on the ends of the connector (1) and lift to remove it.
· Remove the eight screws (2).
· Remove the shield (3).
· Remove the connection board, LLIG (4).
· Remove the four screws (5).
· Remove the LLIF board (6).
· Remove the screw (7).
· Remove the shield (8) with connector AKJ-40AG (9).
· Work the connector free of the bracket and remove the connector.
· The lower base (10) is the housing.
P/N 56725201
P/N N/A
P/N 53059401
P/N 56726001
P/N 55067101
P/N 55067001
Service Guide DOC-IT3000/4000
Connector: AKJ-40AG Option
Cover
Base: Lower Option
Connector: PM8DOX Option
PCB: LLIG (Connection) Option RSPL
PCB: LLIF 2nd Tray Connection
Option
Chapter 3 Maintenance & Disassembly
RSPL
RSPL
RSPL
B.2.17
B.2.17
B.2.17
B.2.17
B.2.17
RSPL B.2.17
Page: 144