Operator Panel Assembly - OKIDATA DOC-IT3000 Service Manual

3.2.05 Operator Panel Assembly

· Press at A and lift the operator panel assembly (1).
· Turn the assembly over.
· Detach the cable (2) from connector CN1.
· Remove the assembly.
Note:
When reassembling, the blue strip on the cable faces away form the operator panel
board.
P/N 53064101
P/N 53505430
Service Guide DOC-IT3000/4000
Panel: Operation Assembly
Cable: Control Panel
Chapter 3 Maintenance & Disassembly
RSPL
RSPL
B.2.02 (without cable)
B.2.02
Page: 90