Front View Of The Hp Storeonce 2900 Backup System - HP StoreOnce 2700 Installation And Configuration Manual

Front view of the HP StoreOnce 2900 Backup system

The HP StoreOnce 2900 Backup system has 6 x 4 TB disks. It does not support connection of an
expansion shelf, but a further six 4 TB disks may be added to the head server (Capacity Upgrade
Kit).
Figure 34 Front view of the HP StoreOnce 2900 Backup system
1. Hot plug drives
2. NIC status LED
3. System Health LED
4. Power On button/LED
5. UID button
6. Blanks
Six 4 TB disks are installed in slots 1 to 6
Off: no network connection or network not configured
Steady green: network connected
Flashing green: network activity
Steady green: Hardware is performing correctly
Flashing amber: degraded condition
Flashing red: critical condition, such as power supply or fan failure
Steady green: Power connected, device ready to use
Flashing green: performing power on sequence
Steady amber: Device switched off or in hibernation with power connected
Steady blue: identifies the unit
Off: No power connected
Steady blue identifies the StoreOnce Backup system in the rack.
Flashing blue: remote management or firmware upgrade in progress
Slots 7 to 12 are available for the 6 x 4TB capacity expansion kit.
Front view of the HP StoreOnce 2900 Backup system 107