Fibre Channel With Vtl - HP StoreOnce 2700 Installation And Configuration Manual

Backup system
Table of Contents

Advertisement

Table 13 Fibre Channel Settings (continued)
Field
FC Address
World Wide Node Name
World Wide Port Name
Number of Logins
Devices per Initiator Node

Fibre Channel with VTL

There are three StoreOnce GUI screens that relate to FC with VTL.
If required, the administrator may configure the port speed or topology from the VTL-Fibre
Channel Settings tab. The default settings are recommended.
NOTE:
in the StoreOnce Catalyst section of the GUI, if you are backing up to StoreOnce Catalyst
target devices over Fibre Channel. Port Speed or Topology settings, defined on either page,
apply to all target devices being backed up over Fibre Channel. Therefore, any changes here
will also apply to StoreOnce Catalyst target devices over Fibre Channel and vice versa.
When the user creates a library, using the VTL-Libraries-Create function, they specify which
FC ports it will use.
The world wide names for the ports can then be found on the VTL-Libraries-Interface Information
tab.
80
Fibre Channel installation and configuration
Description
The FC address of the StoreOnce Catalyst over FC port, or "Down" if
not connected.
Provided when the device is created and is globally unique. It is used
for Fibre Channel zoning for Fibre Channel devices.
Generated automatically by the HP StoreOnce Backup system and
used for Fibre Channel zoning for Fibre Channel devices.
The number of client ports zoned into that StoreOnce Catalyst over FC
port
The number of backup and restore connections allowed from that
StoreOnce Catalyst over FC port
These Fibre Channel settings apply to the whole appliance and can also be edited
Editable
No
No
No
No
Yes

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents