Port Numbering For Hardware Products; Network Bonding Modes - HP StoreOnce 2700 Installation And Configuration Manual

Figure 21 Network configuration hierarchy

Port numbering for hardware products

The StoreOnce CLI and the StoreOnce GUI label port numbers differently. The following table
equates the port numbering as it is referred to in the StoreOnce CLI with the port naming on the
StoreOnce GUI.
Table 3 Port numbering
StoreOnce CLI
and GUI
eth0
eth1
eth2
eth3
eth4
eth5
eth6
eth7
NOTE: On the StoreOnce GUI you can display a rear view of the StoreOnce Backup system to
see which ports are available on your model.

Network bonding modes

Each set of network ports on the appliance can be configured either on separate Subnets or in a
bond with each other (1 Gbit and 10 Gbit ethernet ports cannot be bonded together).
32 Network configuration, understanding the StoreOnce networking concepts
1 Gbit or 10 Gbit
StoreOnce GUI ethernet
Port 1 1 Gbit
Port 2 1 Gbit
Port 3 1 Gbit
Port 4 1 Gbit
Port 1 10 Gbit
Port 2 10 Gbit
Port 3 10 Gbit
Port 4 10 Gbit
StoreOnce Models
All models
All models
All models
All models
2900, 4700 and 4500, but not 2700
2900, 4700 and 4500, but not 2700
4900 only, not 2700, 2900, 4500 or 4700
4900 only, not 2700, 2900, 4500 or 4700