Vertical Start Print Position; Mode Name - Kodak digital science 7500 Installation Instructions Manual

Mode name

A-61074 April 1997
Use the arrow keys to increase or decrease the current distance:
— The left arrow key will decrease the value in 0.125 inch or 1 mm
increments.
— The right arrow key will increase the value in 0.125 inch or
1 mm increments.
— The down arrow key will decrease the value in 1.250 inch or
20 mm increments.
— The up arrow key will increase the value in 1.250 inch or 20 mm
increments.
Press Enter .
Mode name defines a name for the mode.
The default is MODE xx, where xx is the 2-digit mode number
(i.e., 01 – 18).
The options are:
— Any name with 7 or less ( 7) characters. Available characters
include upper- and lowercase alphanumerics and any other ASCII
character appearing in a standard keyboard.
Select Mode Name from the Mode Configuration window.
Mode Number: 01 Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs IA Display Format
FthenR
Adjoining IA
None
Batching
Off
Length Monitor
Off
Skew Monitor
NA NA
Footswitch
Save & End Session
Save & Prev Menu
Enter the desired mode name.
Press Enter .
Item #: 17.0
Patch Reader Off
COIN2 Port Select n/a
OCR n/a
Bar Code Reader Off
Printr Controller Supprs
Front Printer Off
Rear Printer Off
Mode Name MODE0
Overrides No Sav
Don't Save & End Session
Don't Save & Prev Menu
Front Printer
On/Off
Print Definition

Vertical Start Print Position

Previous Menu
Enter Mode Name
MODE 01
Up to 7 characters
3-67