Level To Follow Level 0 - Kodak digital science 7500 Installation Instructions Manual

Level to follow level 0

3-16
NOTE: This menu option is a valid selection when using any of the
available index formats defined using the Index Format
option.
Select Level 0 .
Refer to Description 4: Level Rule Options and Defaults for a
complete listing of the valid selections and default values for each
mode.
Mode Number: 01 Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs
IA Display Format
FthenR Adjoining IA
None
Batching
Off
Length Monitor
Off
Skew Monitor
NA NA
Footswitch
Save & End Session
Save & Prev Menu
Select the desired document level from the Lv To Follow Lv 0
menu.
Press Enter.
— If the document level selected is valid, the Lv To Follow Lv 0
menu will close and another level may be chosen from the Level
menu.
— If the document level selected is not valid, based upon the
Index Format already selected, an error message, such as; Bad
Level (Level 2) for a Single-Level system. Press <ENTER>
key will appear.
To clear the message:
Press Enter and select a valid document level.
Item #: 3.1
Patch Reader Off
COIN2 Port Select n/a
OCR n/a
Bar Code Reader Off
Printr Controller Supprs
Front Printer Off
Rear Printer Off
Mode Name MODE0
Overrides No Sav
Don't Save & End Session
Don't Save & Prev Menu
Level
Level 0
Level 1
Level 2
Level 3
Previous Menu
Lv To Follow Lv 0
Level 0
Level 1
Level 2
Level 3
Previous Menu
A-61074 April 1997