Kodak digital science 7500 Installation Instructions Manual page 52

Detection range
A-61074 April 1997
Detection range defines the amount of tolerable skew.
The default for all modes is 10–30 degrees.
The options are:
— 5–30 degrees —results in an error being reported if the amount of
document skew is between 5 and 30 degrees.
— 10–30 degrees— results in an error being reported if the amount
of document skew is between 10 and 30 degrees.
Select Detection Range from the Skew Monitor menu.
Mode Number: 01 Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs
IA Display Format
FthenR
Adjoining IA
None
Batching
Off
Length Monitor
Off
Skew Monitor
NA NA
Footswitch
Save & End Session
Save & Prev Menu
Select the desired skew detection range.
Press Enter.
Item #: 8.2
Patch Reader Off
COIN2 Port Select n/a
OCR n/a
Bar Code Reader Off
Printr Controller Supprs
Front Printer Off
Rear Printer Off
Mode Name MODE0
Overrides No Sav
Don't Save & End Session
Don't Save & Prev Menu
Skew Monitor
On/Off
Detection Range
Error Response
Previous Menu
Detection Range
5 – 30 Degrees
10 – 30 Degrees
Previous Menu
3-31