Mode Name - Kodak digital science 7500 Installation Instructions Manual

On/off
A-61074 April 1997
On/off enables or disables printing by the rear printer.
The default for all modes is Disable .
The options are:
— Disable —disables printing by the rear printer.
— Enable— enables printing by the rear printer.
NOTE: If Disable is selected, definitions for the remaining rear printer
options will be ignored.
Select On/Off from the Rear Printer menu.
Mode Number: 01 Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs IA Display Format
FthenR
Adjoining IA
None
Batching
Off
Length Monitor
Off
Skew Monitor
NA NA
Footswitch
Save & End Session
Save & Prev Menu
Select Disable or Enable .
Press Enter.
Item #: 16.1
Patch Reader Off
COIN2 Port Select n/a
OCR n/a
Bar Code Reader Off
Printr Controller Supprs
Front Printer Off
Rear Printer Off

Mode Name

MODE0
Overrides No Sav
Don't Save & End Session
Don't Save & Prev Menu
Rear Printer
On/Off
Print Definition
Vertical Start Print Position
Previous Menu
Rear Printer
Disable
Enable
Previous Menu
3-63