Kodak digital science 7500 Installation Instructions Manual page 61

Confirmation tone
3-40
Confirmation tone enables or disables the Confirmation Tone which
sounds when a patch document is detected.
The default for all modes is Disable.
The options are:
— Disable— results in no tone sounding when a patch document is
detected.
— Enable— results in a tone sounding when a patch document is
detected.
Select Confirmation Tone from the Patch Reader menu.
Mode Number: 01 Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs IA Display Format
FthenR
Adjoining IA
None
Batching
Off
Length Monitor
Off
Skew Monitor
NA NA
Footswitch
Save & End Session
Save & Prev Menu
Select Disable or Enable.
Press Enter.
Item #: 10.3
Patch Reader Off
COIN2 Port Select n/a
OCR n/a
Bar Code Reader Off
Printr Controller Supprs
Front Printer Off
Rear Printer Off
Mode Name MODE0
Overrides No Sav
Don't Save & End Session
Don't Save & Prev Menu
Patch Reader
On/Off
Transfer Patch Definition
Confirmation Tone
Level Transfer on T-Patch
Previous Menu
Confirmation Tone
Disable
Enable
Previous Menu
A-61074 April 1997