Kodak digital science 7500 Installation Instructions Manual page 48

Maximum length
A-61074 April 1997
Defines the maximum document length accepted.
The default for all modes is 13.000 inches / 330 mm.
The options are:
— Within the range of 2.500 inches / 64 mm minimum to
20.000 inches / 508 mm maximum.
Select Maximum Length from the Length Monitor menu.
Mode Number: 01 Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs
IA Display Format
FthenR
Adjoining IA
None
Batching
Off
Length Monitor
Off Skew Monitor
NA NA
Footswitch
Save & End Session
Save & Prev Menu
Use Arrow Keys to Set
Increase value by 0.125 inch or 1mm
Decrease value by 0.125 inch or 1mm
Increase value by 1.250 inch or 20mm
Decrease value by 1.250 inch or 20mm
Enter the desired maximum document length using the numeric
keys;
or
Use the arrow keys to increase or decrease the current minimum
document length to the desired maximum document length:
— The left arrow key will decrease the value in 0.125 inch or 1 mm
increments.
— The right arrow key will increase the value in 0.125 inch or
1 mm increments.
— The down arrow key will decrease the value in 1.250 inch or
20 mm increments.
— The up arrow key will increase the value in 1.250 inch or 20 mm
increments.
Press Enter .
NOTE: A maximum document length of 17.000 inches / 432 mm or
less is recommended based upon the capacity of the exit
hopper.
Item #: 7.3
Patch Reader Off
COIN2 Port Select n/a
OCR n/a
Bar Code Reader Off
Printr Controller Supprs
Front Printer Off
Rear Printer Off
Mode Name MODE0
Overrides No Sav
Don't Save & End Session
Don't Save & Prev Menu
Length Monitor
On/Off
Minimum Length
Maximum Length
Error Response
Previous Menu
Enter Max. Doc. Length
Range: 2.500 . . . 20.000
13.000
3-27