Kodak digital science 7500 Installation Instructions Manual page 56

Confirmation tone
A-61074 April 1997
Confirmation tone enables or disables the Confirmation Tone which
sounds when the Footswitch is pressed or released.
The default for all modes is Disable.
The options are:
— Disable— results in no tone sounding when the footswitch is
pressed or released.
— Enable— results in a tone sounding when the footswitch is
pressed and released.
Select Confirmation Tone from the Footswitch menu.
Mode Number: 01 Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs IA Display Format
FthenR
Adjoining IA
None
Batching
Off
Length Monitor
Off
Skew Monitor
NA NA
Footswitch
Save & End Session
Save & Prev Menu
Select Disable or Enable.
Press Enter.
Item #: 9.2
Patch Reader Off
COIN2 Port Select n/a
OCR n/a
Bar Code Reader Off
Printr Controller Supprs
Front Printer Off
Rear Printer Off
Mode Name MODE0
Overrides No Sav
Don't Save & End Session
Don't Save & Prev Menu
Footswitch
Press Definition
Confirmation Tone
Release Definition
Previous Menu
Confirmation Tone
Disable
Enable
Previous Menu
3-35