Spit Pad Replacement; Using The Imprinter; Print Position: Hardware - Kodak Ngenuity 9090DB User Manual

Spit pad replacement

Using the imprinter

Print position: hardware

A-61662 April 2010
The back page imprinter assembly contains a spit pad that is used to
absorb any excess ink from the front page imprinter during printing. The
spit pad is located underneath the back page assembly's entry tray.
Over time the spit pad will become saturated and will need to be
replaced. The life expectancy of the spit pad is expected to last as long
or longer than the transport rollers. Contact your Kodak Service
Representative for spit pad replacement.
Imprinter operation is controlled via the hardware and software.
To print a string on the scanned document, adjust the position of the
print head carriage according to the size of the sheets that you want to
scan.
Carriage tab
• Move the carriage to align the carriage tab with one of the marks that
appears in the scale on the imprinter. For the print string to appear on
the right side of the page, move the carriage to the right side of the
scale. For the imprint to appear on the left side of the page, move the
carriage to the left side of the scale.
Print positions
B-9