Entering Names For The Heating Circuit; Selecting The Language - Viessmann Vitotronic 300-K Operating Instructions Manual

Further Adjustments
Entering Names for the Heating Circuits

Selecting the Language

26
Vitotronic 200 and 300-K Operating
Only for the Vitotronic 300-K.
You can give heating circuits 1, 2 and 3 ("HC1", "HC2"
and "HC3") individual names. The abbreviations "HC1",
"HC2" and "HC3" will be retained.
Extended menu
1.
2. "Settings"
3. "Name for heating circ."
4. "Heating circuit 1", "Heating circuit 2 or "Heating
circuit 3"
5. "Change?"
6. You can select the required symbol with
7. takes you to the next character.
8. Press OK to accept all entered characters at once
and simultaneously exit this menu.
Note: The entered term is deleted with "Reset?";
"Heating circuit 1" will then be shown again.
Example:
Name for "Heating circuit 1":
Ground floor
The menu shows "Ground floor" for "Heating circuit 1".
Only for the Vitotronic 300-K.
Extended menu
1.
2. "Settings"
3. "Language"
4. Select the required language.
.