Vitotronic 200 and 300-K Operating
How to Use the Controls, Vitotronic 200
In multi boiler systems, each Vitotronic 200 indicates
the boiler number on the standard display. The following
example shows the boiler water temperature as indicated
by boiler 3.
Press
.
This takes you to the menu for settings and scanning.
Note: If a boiler is not in operation, the following appears
in the display of the corresponding control unit:
Off
Symbols
These symbols are not always displayed, but appear
subject to the system version and the operating state.
Flashing displays indicate that modifications can be made.
Menu
Information
Further adjustments
S
Emissions test mode
Heating program
9
Standby mode with frost protection monitoring
The boiler is available to the cascade control unit
for heat production.
Messages
Service message
Fault message
E
Burner fault
Displays
p
Circulation pump at output 20 is running
A
Burner in operation
D
Factory settings
Operation
9