Setting The Time And Date; Setting The Temperature Unit ( O C/ O F); Restoring The Factory Settings - Viessmann Vitotronic 300-K Operating Instructions Manual

Vitotronic 200 and 300-K Operating

Setting the Time and Date

Setting the Temperature Unit (°C/°F)
Vitotronic 200
Factory setting: °C
Extended menu
1.
2. Settings"
3. "Temperature unit"
4. Select the temperature unit "°C" or "°F".
Restoring Factory Settings
Vitotronic 200
You can simultaneously reset all changed values to the
factory settings.
Extended menu
1.
2. "Settings"
3. "Standard setting"
Factory settings:
H Heating program: " "
H Temperature unit: °C
Only for the Vitotronic 300-K.
The time and date are factory-set. If your heating system
has been shut down for a long time, it may be necessary
to set the time and date.
Extended menu
1.
2. "Settings"
3. "Time/Date"
4. Set the time and date.
Vitotronic 300-K
Factory setting: °C
Extended menu
1.
2. Settings"
3. "Temperature unit"
4. Select the temperature unit "°C" or "°F".
Vitotronic 300-K
You can reset the factory settings of all modified values
for each heating circuit separately.
Extended menu
1.
2. "Settings"
3. "Standard setting"
4. "Heating circuit 1", "Heating circuit 2" or "Heating
circuit 3"
The following settings and values are reset:
H Set room temperature for standard heating mode
("Set room temperature").
H Set room temperature for reduced heating mode
("Set red. room temp").
H Heating program ("Heating program").
H Set DHW temperature ("Set DHW temperature").
H Time program for central heating ("Heating time
program").
H Time program for DHW heating ("DHW time prog").
H Time program for DHW circulation pump
("DHW circ time prog").
H Heating curve slope ("Slope") and shift ("Shift").
Party mode, economy mode and holiday program are
deleted.
Further Adjustments
27