Selecting a heating/cooling circuit
The heating/cooling of all rooms can be distributed
amongst several heating/cooling circuits, e.g. a heat-
ing/cooling circuit for your apartment, and a heating/
cooling circuit for your office.
In the menu bar, the following designations are used at
the factory: "Heating/cooling circuit 1", "Heating/
cooling circuit 2", etc. You can alter these designa-
tions: See chapter "Naming heating/cooling circuits".
If your system has several heating/cooling circuits, in
■
"Indoor environment" in the default display, first
select the heating/cooling circuit for all room heating/
room cooling settings that you want to change.
■
If there is only one heating/cooling circuit, this selec-
tion option is not available.
Setting the room temperature for a heating/cooling circuit
The standard room temperature is the temperature at
which you feel comfortable. Your home is always
heated or cooled to this temperature when a time
phase with the temperature level "Standard" is active
in the time program.
Set the time program for room heating/room cooling:
See page 26.
Factory settings:
Setting temperature levels for room heating/room cooling
Tap the following buttons:
1.
for the default display "Indoor environment"
2.
for the required heating/cooling circuit
Switching room heating/room cooling on or off (operating program)
For information on the operating programs: See
page 19.
Tap the following buttons:
1.
for the default display "Indoor environment"
2.
for the required heating/cooling circuit
Room heating/room cooling
Example: Select heating/cooling circuit 3.
Tap the following buttons:
1.
for the default display "Indoor environment"
2. "Heating/cooling circuit 1"
3. Tap on "Heating/cooling circuit 3".
Room heating
■
Standard room temperature: 20 °C
■
Reduced room temperature: 18 °C
■
Comfort room temperature: 22 °C
Room cooling
■
Standard room temperature: 24 °C
■
Reduced room temperature: 27 °C
■
Comfort room temperature: 23 °C
3.
for the required value of the relevant tempera-
ture level:
■
"Reduced"
■
"Standard"
■
"Comfort"
4.
to confirm
3. Select ,
,
or
Switches the room heating on.
Switches the room cooling on.
Switches on room heating/room cooling.
Switches standby mode on. Room heating and
room cooling are switched off.
4.
to confirm
in the menu bar
.
25