Data Is Not Printed In The Correct Color (Specified Color) Due To Color Mismatches - Canon LBP7110Cw Manual

0F40-098
Data Is Not Printed in the Correct Color (Specified Color) Due to Color
Mismatches
Perform one of the following solutions according to the cause.
<Cause 1> The toner cartridges are not installed properly.
Check the installation status of the toner cartridges.
Solution
"Replacing the Toner Cartridge"
<Cause 2> Appropriate paper is not being used.
Replace the paper with that which can be used with this printer.
Solution
"Usable Paper"
<Cause 3> The toner cartridges are almost out of toner.
Correct color mismatches.
Solution 1
"Correcting Color Mismatches (Color Mismatch Correction)"
Check the toner cartridges status and replace the toner cartridges of the colors are nearing the end of
their life.
Solution 2
"Checking the Consumables Status"
"Replacing the Toner Cartridge"
<Cause 4> The drum in any of the toner cartridges has deteriorated.
Replace the toner cartridges with new ones.
Solution
"Replacing the Toner Cartridge"
<Cause 5> Printed before performing calibration or color mismatch correction immediately
after the printer is turned ON and so on.
Make sure that calibration or color mismatch correction is completed before sending data to the printer.
Solution
<About color mismatch>
Laser printers are manufactured with technology of high precision. A color mismatch may be slightly conspicuous
Downloaded from ManualsPrinter.com Manuals
Specify whether calibration or color mismatch correction should be performed immediately after the
printer is turned ON.
"Auto Image Quality Adjustment Settings"