Canon LBP7110Cw Manual page 85

When you perform calibration or color mismatch correction immediately after the printer is turned ON
Select [Execute Immediately (Level 1)] or [Execute Immediately (Level 2)] in [Image Quality Adjustment at Startup].
[Execute Immediately (Level 1)]
[Execute Immediately (Level 2)]
When calibration or color mismatch correction is performed immediately after the printer is turned ON, extra time is
required until the printer is ready to print.
If eight or more hours has elapsed from the time the printer entered the sleep mode until the time the sleep mode was
canceled, calibration or color mismatch correction will be performed according to the [Image Quality Adjustment at
Startup] setting when the sleep mode is canceled.
(Depending on your environment, calibration or color mismatch correction may be performed even if less than eight
hours has elapsed.)
If calibration or color mismatch correction is not automatically performed
Depending on the internal state of the printer, even if [Execute Immediately (Level 1)] or [Execute
Immediately (Level 2)] is selected, calibration or color mismatch correction may not be performed
immediately after the printer is turned ON.
If less than eight hours has elapsed from the time the printer was turned OFF until the time the printer was
turned ON again, calibration or color mismatch correction may not be performed immediately after the printer
is turned ON.
4
Click [OK].
Downloaded from ManualsPrinter.com Manuals
Only color mismatch correction is performed immediately after the printer is turned
ON.
Calibration and color mismatch correction are performed immediately after the
printer is turned ON.