Canon LBP7110Cw Manual page 262

SNTP Settings
(1) Specify the settings for SNTP.
(2) Click [OK].
[Use SNTP]
[NTP Server
Name]
[Polling Interval]
If an NTP server is not available
This function is not supported for Macintosh.
You can notify the printer of the time set on the computer using the following procedure.
1. Display the Printer Status Window.
"Printer Status Window"
2. Select [Preferences (Administrators)] from the [Options] menu.
3. Select the [Notify the Printer of the Time] check box.
NOTE
Checking communication with the NTP server
You can check communication with the NTP server by clicking [Check NTP Server Connection] on the [TCP/IP Settings]
page.
Downloaded from ManualsPrinter.com Manuals
If you use the SNTP client function to obtain the time information from the NTP server (public
time information server on the Internet), select the check box.
When obtaining the time information from the NTP server, be sure to specify the correct
time zone and daylight saving time settings.
"Specifying the Time Zone and Daylight Saving Time Settings of the Printer"
If you have specified the DNS settings, enter the name of the NTP server.
If you have not specified the DNS settings, enter the IP address of the NTP server.
Specify the interval at which to request the time information from the NTP server.