Canon LBP7110Cw Manual page 350

6
Select [Default Policy].
[Reject]
[Allow]
IMPORTANT
When selecting [Reject]
You cannot access from a MAC address not set in [Exception Addresses]. Therefore, confirm the MAC address when
entering it.
If there is no corresponding MAC address, you cannot access the network. In this case, you can access the
Downloaded from ManualsPrinter.com Manuals
Restricts data transmission to or data reception from MAC addresses other than those specified
in [Exception Addresses].
(Only the MAC addresses specified in [Exception Addresses] are available for transmission or
reception.)
Allows data transmission to or data reception from MAC addresses other than those specified in
[Exception Addresses].
(Only the MAC addresses specified in [Exception Addresses] are restricted.)