Table of Contents
Advertisement
[Use SNMPv1]
[Community
Name 1]
[MIB Access
Permission 1]
[Community
Name 2]
[MIB Access
Permission 2]
[Dedicated
Community
Settings]
6
Configure the SNMPv3 protocol.
To specify SNMPv3, you need to activate SSL features in advance.
"Setting the SSL Encrypted Communication Function"
Downloaded from ManualsPrinter.com Manuals
Select the check box to use the SNMPv1 protocol.
Specify an SNMPv1 community name. You can enter up to 32 single-byte alphanumeric
characters. The default value is [public].
Specify the MIB access authority of [Community Name 1]. When both reading and writing are
permitted, you can access the printer from a computer on the network and change settings.
[Read/Write]
Both reading and writing are permitted.
[Read Only]
Reading only is permitted.
Specify an SNMPv1 community name. You can enter up to 32 single-byte alphanumeric
characters.
Specifies the MIB access authority of [Community Name 2]. When both reading and writing are
permitted, you can access the printer from a computer on the network and change settings.
[Read/Write]
Both reading and writing are permitted.
[Read Only]
Reading only is permitted.
Specify a dedicated community and its MIB access right.
[Off]
The dedicated community is deactivated.
[Read/Write]
Both reading and writing are permitted.
[Read Only]
Reading only is permitted.
Hide quick links:
Advertisement
Table of Contents
