Auto Image Quality Adjustment Settings - Canon LBP7110Cw Manual

0F40-020

Auto Image Quality Adjustment Settings

You can use the following procedure to set the printer to automatically perform calibration at the designated time everyday
or to perform calibration or color mismatch correction immediately after the printer is turned ON.
1
Click [ ] displayed in the task tray, and then select a printer name.
2
)URP WKH >2SWLRQV@ PHQX VHOHFW >'HYLFH 6HWWLQJV@
3
Specify the auto image quality adjustment settings.
When performing calibration automatically at the designated time everyday
(1) Select the [Use Periodical Calibration Timer] check box.
(2) Specify the time to perform calibration in [Time].
If calibration is not automatically performed
When the printer is under the following circumstances, calibration is not performed even if [Use Periodical Calibration
Timer] is specified.
When the printer is busy printing or an error is occurring
When the time specified in [Time] has come within 30 minutes after performing calibration last time
(Calibration is performed if the power of the printer is cycled before the specified time.)
Downloaded from ManualsPrinter.com Manuals
>,PDJH 4XDOLW\ $GMXVWPHQW 6HWWLQJV@