MA lighting SCANCOMMANDER User Manual page 74

Touch board input
Trackball or mouse
Keyboard
ATTENTION!!
74 74 74 74
74
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de
This input is used to control 16 different functions (similar to the DMX-Input).
For the configuration see "Remote".
Pinout: pin 1 = function 1
pin 2 = function 2
etc....
pin 25= common
The threshold level is between 4V and 10V. Input impedance is 100 kOhm.
Necessary to work comfortably in the Follow Mode and to set the Pan/Tilt
position.
The trackerball connector is compatible with the ATARI norm. PC compatible
trackerballs will not work with the Scancommander.
Necessary to enter the names of the Memories etc. The connector is a 5pin
Din. Every PC compatible AT/MF-keyboard can be used.
All DMX512 and analogue inputs and outputs must be shielded and the shielding
must be connected to the ground and the case of the corresponding plug.