Table of Contents

Advertisement

Available languages

Available languages

MA 4Port Node
QuickManual
Version XIII.02
deutsch / english

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4Port Node and is the answer not in the manual?

Questions and answers

Summary of Contents for MA lighting 4Port Node

  • Page 1 MA 4Port Node QuickManual Version XIII.02 deutsch / english...
  • Page 2 LIGHTING...
  • Page 3 – ob als Ein- oder Ausgang. Der MA 4Port Node ist auch in einer „onPC” Version ist erhältlich, die in Kombination mit der kostenfreien grandMA2 onPC Software 2.048 Parameter zur Verfügung stellt. Außerdem lässt sich der 4Port Node onPC...
  • Page 4: Bestimmungsgemäßer Gebrauch

    +49.5251.688865-30. In dringenden Notfällen nehmen Sie bitte Kontakt zu Ihrem nächsten Distributor oder zur MA Lighting Service-Hotline (Telefon: +49.5251.68 88 65-99) auf. Diese Hotline (24 / 7) ist nur für Notfälle – für Anwender, die z.B. mitten in einer Produktion...
  • Page 5: Spezifikation

    (XLR 5 pin) an der Rückseite. Die DMX OUTs können auch zu DMX IN konfiguriert werden Wartung Ethernet RJ 45 Netzwerk-Anschluss Anschluss an der Front nur für Updates per USB-Stick verwenden. Keine Peripheriegeräte Konformität anschießen (mouse, keyboard o.ä) 2“ TFT Farbmonitor 2 048 Parameter (MA 4Port Node onPC)
  • Page 6 Weitbereichsnetzteil, schaltet automatisch um! Stromkabel: Nur ausreichend isolierte und geschützte Kabel verwenden Transport (min. Ø = 3 x 1,0mm²). Erforderlicher Steckertyp (am MA 4port Node): PowerCon (blau) von Fa. NEUTRIK AG, Liechtenstein Sicherheit Betriebsgrenzen Erforderlicher Steckertyp (Stromquelle): Abhängig vom technischen Standard des jeweiligen Einsatzortes.
  • Page 7 MA 4Port Node Transport Bitte das Gewicht des Gerätes beachten. Vorsichtig transportieren; bei Nichtbeachten können Daten Personen- oder Sachschäden entstehen. MA 4Port Node ca. 1,3 kg ohne Transportbehälter, Verpackung, Transport Schutztasche oder Koffer Vor dem Transport alle Kabel entfernen. Sicherheit Für den Transport und die Wahl des geeigneten Transportmittels ist...
  • Page 8 MA 4Port Node Symbole und Warnzeichen Daten Transport Sicherheit Hauptschalter Wechsel- Das Gerät muss Achtung Achtung strom (AC) separat entsorgt Betriebsgrenzen AN / AUS werden. Warnung vor einer Warnung vor Gefahrenstelle Gefährlicher Die örtlichen Vorschriften elektrischer Spannung Quickstart beachten! Connect...
  • Page 9: Allgemeine Sicherheitsvorschriften

    Allgemeine Sicherheitsvorschriften MA 4Port Node Lesen Sie vor dem Gebrauch alle Anweisungen der Ist das Netzkabel oder ein Stecker beschädigt, so sollten Bedienungsanleitung. Achten Sie hierbei speziell auf die Sie diese umgehend durch eine Fachkraft austauschen Sicherheitshinweise. lassen. Bewahren Sie die Bedienungsanleitung für den späteren Gebrauch Daten Es dürfen nur Netzkabel mit Sicherheitsprüfzeichen...
  • Page 10 MA 4Port Node Warnhinweise Die Wartung des Gerätes darf ausschließlich durch geschultes Personal durchgeführt werden, da beim Öffnen und / oder Entfernen von Abdeckungen spannungsführender Teile freigelegt werden. Daten Neben anderen Risiken besteht hierbei die Gefahr eines elektrischen Schlages. Transport...
  • Page 11 MA 4Port Node Betriebsgrenzen Temperatur Daten Betrieb: +5°C bis +40°C / 41°F bis 104°F Höhere Temperaturen können das Kühlsystem des Gerätes Transport überfordern und zum Ausfall von elektrischen Komponenten führen. Lagerung / Transport: -10°C bis +50°C / 14°F bis 122°F...
  • Page 12 Anschlussmöglichkeiten MA 4Port Node Daten Transport Sicherheit 4 DMX OUT (XLR 5 pin) – Diese können auch zu DMX IN umkonfiguriert werden RJ45 Ethernet PowerCon (blau) Netzanschluss: 100 – 240 V~ (+/- 10%) 50/60 Hz (USA, Kanada) Betriebsgrenzen Das Netzteil passt sich automatisch an die Netzspannung an. Ein PowerCon Stecker (blau) ist im Lieferumfang enthalten.
  • Page 13 MA 4Port Node MA 4Port Node mit Konsole - max 2048 Parameter pro Node Daten Transport Sicherheit MA 4Port Node onPC + MA onPC command wing mit Laptop/PC - max 4 096 Parameter Betriebsgrenzen Quickstart Connect Quickstart ON / OFF MA Lighting bietet unterschiedliche Möglichkeiten, die Zahl der Parameter von grandMA2 onPC zu er-weitern.
  • Page 14 Option für die Montage im Rigg Betriebsgrenzen Quickstart Connect Option für die Montage im 19“ Rack (zusätzliche Option: DMX- und Ethernet - Quickstart Anschlüsse vorne) ON / OFF Wartung Konformität Option für die Montage von 2 MA 4Port Node im 19“ Rack...
  • Page 15 Display MA 4Port Node Das Display des MA 4Port Node zeigt lediglich die wichtigsten Einstellungen. Zum Konfigurieren ist unbedingt eine grandMA - Konsole oder die Software "onPC" erforderlich. Nach dem Einschalten erscheint im Display: Daten Transport Sicherheit Betriebsgrenzen Quickstart Connect...
  • Page 16 (in der grandMA2 Version V2.8 noch nicht implementiert) Konformität Reset Mode: Der MA 4Port Node wird zurückgesetzt, alle Einstellungen bleiben erhalten Restore Mode: Der MA 4Port Node wird in das Factory Default zurückgesetzt (Werkseinstellung) HINWEIS: nach dem Reset die IP Nummer anpassen.
  • Page 17 Reboot immer die werksseitige IP Adresse mit den letzten drei Stellen der Seriennummer in der letzten Gruppe (192.168.0.xxx). - Wird die Menü-Taste innerhalb dieser Zeit nicht gedrückt, wird der MA 4Port Node nur aktualisiert – alle Einstellungen bleiben erhalten Nach der Anweisung „Please remove USB stick for reboot”...
  • Page 18 3 Gruppen der IP-Adresse müssen übereinstimmen. Auf diesem Pult muss die gewünschte Softwareversion geladen sein. Wenn das Feld "Version" rot unterlegt ist, dann hat der MA 4Port Node eine andere Version der Software geladen Transport als die Konsole oder der onPC.
  • Page 19 DMX NODE öffnen. Bei Bedarf die Firmware-Version des MA 4Port Node angleichen - falls das Feld "Version" rot unterlegt ist IP - Adresse des MA 4Port Node bei Bedarf ändern. Sind mehrere MA 4Port Node im Netz, kann der Quickstart jeweilige Node mit der Taste IDENTIFY identifiziert werden - das Display und die LED des gewählten Node...
  • Page 20 Speichern der Konfiguration MA 4Port Node Die Einstellungen der MA 4Port Node kann auf der Festplatte der grandMA2 Konsole / onPC gespeichert werden. Im Menü SETUP / NETWORK / MA NETWORK CONFIGURATION / DMX NODES den Button SAVE TO DEFAULT drücken...
  • Page 21: Wartung

    MA 4Port Node Reinigung Das Gerät benötigt nur ein Mindestmaß an Pflege. Vor dem Reinigen das Gerät von der Stromversorgung trennen. Die Oberfläche nur mit einem trockenen, nicht fusselnden Tuch reinigen. Daten Keine flüssigen Reiniger oder Druckluft verwenden. Keinerlei Lösungsmittel oder scharfe Reiniger verwenden.
  • Page 22 Dachdeckerstraße 16 Daten D-97297 Waldbüttelbrunn Deutschland Transport Erklärt, dass die Produkte Produktkategorie: Kontrollgerät Sicherheit Produktnamen: MA 4Port Node / MA 4Port Node onPC Betriebsgrenzen Den folgenden Produktspezifikationen entspricht: Quickstart Sicherheit: EN60065, EN60950-1 Connect EMV (EMC): EN55103-1: 2009 (E1) EN55103-2: 2009 (E2) Quickstart Zusätzliche Informationen:...
  • Page 23 User alle Möglichkeiten zum Programmieren oder OffLine-Programmieren am Laptop oder PC. Mit der grandMA 3D - Software kann es zum perfekten Designstudio ergänzt werden. …. und es ist die Grundlage für die Funktion des MA 4Port Node. Die grandMA2 onPC und grandMA 3D Software stehen auf unserer Homepage www.malighting.com...
  • Page 24 ...und die anderen Mitglieder der grandMA2 Familie grandMA2 full-size grandMA2 light grandMA2 ultra-light grandMA2 faderwing Die grandMA2 full-size und ihre kleineren Geschwister. Für alle Bereiche in der Beleuchtung – konventionelles Licht, Moving Lights, LEDs, Video usw. Ausgestattet mit zukunftsweisender Technologie und einigen Spezialitäten (z.B.
  • Page 25 To achieve the highest flexibility, each DMX port can be individually configured as DMX-in or DMX-out. MA 4Port Node is also available as “onPC” versions, meaning that the MA 4Port Node onPC can be used in combination with the free-of-charge grandMA2 onPC software running on a computer to provide 2,048 parameters.
  • Page 26: Intended Use

    Safety and environmet MA 4Port Node standard accessory: PowerCon connector (blue) MA 4Port Node onPC standard accessory: PowerCon connector (blue) Quickstart Optional accessories: 19” rack mounting kit – blank panel, 19” rack mounting Connect kit – XLR connectors, 19” rack mounting kit – 2x4Port Node, rigging plate,...
  • Page 27 MA 4Port Node Data Current: 100 – 240 V ~ (+/- 10%) 50 / 60 Hz (USA, Canada Automatic operation, no switching necessary! Data Power cable: Only adequately protected cables may be used (min. Ø = 3 x 1,0mm²). Transport...
  • Page 28: Specification

    ON / OFF USB Port connector on the front side. For update via USB-stick only. Do not connect any peripheral Maintenance device (mouse, keyboard or similar) 2“ TFT color monitor Conformity 2 048 Parameter (MA 4Port Node onPC)
  • Page 29 MA 4Port Node Transport Please be aware of the weight of the product. Be careful when moving it; Data otherwise you may injure your back or other parts of your body. MA onPC command wing approx. 1,3 kg without cover, packaging, case Transport Remove all cables prior to transport.
  • Page 30: Symbols And Warning Labels

    Symbols and warning labels MA 4Port Node Data Transport Safety Warning Warning Supply Alternating Dispose of as instructions voltage current hazardous Danger Area Danger of electric ON/OFF (AC) waste. Safety and shock Follow the local environmet applicable regulations! Quickstart Connect...
  • Page 31: General Safety Instructions

    MA 4Port Node General Safety Instructions Do not ignore the safety purpose of the grounding-type Read all the instructions in the user’s manual, especially the Data plug. A grounding type plug has two blades and a third safety requirements, see Safety requirements grounding connection.
  • Page 32: Electric Shock Warning

    MA 4Port Node Electric shock warning The unit should be serviced by qualified personnel only, as live parts may be exposed when opening and /or removing coverings; besides harm to others, you run the risk of suffering an electric Data shock.
  • Page 33: Operating Limits

    Operating limits MA 4Port Node Temperature Operation: Data +5°C up to + 40°C / 41°F up to + 104°F Higher temperature can over-stress the cooling system of the apparatus and destroy hardware components. Transport Storage / Transport: -10°C up to + 50°C / 14°F up to + 122°F...
  • Page 34 MA 4Port Node Connectivity Data Transport Safety instructions 4 x DMX OUT (XLR 5 pin) ports can also be configured to DMX IN RJ45 Ethernet socket Safety and PowerCon (blue) 100 – 240 V~ (+/- 10%) 50/60 Hz (USA, Kanada) environmet Automatic operation, no switching necessary!.
  • Page 35 Connect / examples MA 4Port Node MA 4Port Node connect to console - max 2048 parameters per Node Data Transport MA 4Port Node onPC + MA onPC command wing with Laptop/PC - max 4 096 parameters Safety instructions Safety and environmet...
  • Page 36: Installation

    Installation MA 4Port Node 9“ stand alone (standard) Data Transport Safety Option for rigg mounting instructions Safety and environmet Quickstart Connect Options for 19” mounting and DMX and Ethernet front Quickstart ON / OFF Maintenance Conformity Option for 2x 9“ mounting...
  • Page 37 Display MA 4Port Node The MA 4Port Node display will only show the most important settings. For configuring a node, you have to use a grandMA console or the „onPC“ software. after switching the device on, the display will show this menu:...
  • Page 38 (not implemented in version V2.8) Conformity Reset Mode: the MA 4Port Node will be reseted, all settings will remain. Restore Mode: the MA 4Port Node will be reseted to Factory Default NOTE: after reset customize IP -number.
  • Page 39 IP address is set to 192.168.0.xxx (xxx means the last three digits of serial number of the unit) - When the button MENU is not pressed within this few seconds, the MA 4Port Node will be updated – all settings remain.
  • Page 40 Update from grandMA2 console or onPC (do not use in live situation) The 4Port Node can be updated from a grandMA console or using the onPC software. To do so, the 4Port Node must be present in the same network as the console (grandMA2, grandMA2 light, grandMA2 ultralight, or Data grandMA2 onPC), i.e.
  • Page 41 MA 4Port Node (100 - 240V∼ (+/- 10%) ,50 or 60 Hz). Connect the MA 4Port Node using a network cable (RJ45 plug). Either via the switch / hub or by directly plugging it into a PC or laptop computer or grandMA 2 console- - no cross-cable! Transport start grandMA2 –console or grandMA2 onPC and switch on MA 4Port Node (set main switch at the back to...
  • Page 42 Open menu SETUP / NETWORK / MA NETWORK CONFIGURATION / DMX NODES and press button SAVE TO DEFAULT. Data NOTE: With command SAVE SHOW settings of the MA 4Port Node are not stored; settings must be stored with SAVE TO DEFAULT! Transport...
  • Page 43 Furthermore it is expandable to a complete design studio by connecting it to grandMA 3D. …. and it´s the basis for the function of the MA 4Port Node. The grandMA2 onPC and grandMA 3D software can be downloaded free of charge at www.malighting.com There...
  • Page 44: Maintenance

    MA 4Port Node Cleaning The MA 4Port Node only requires minor attention. Disconnect electric power supply prior to cleaning. Clean the surface only with dry soft cloth. Do not use any liquid cleaner or compressed air. Data Do not use any solvent. Check ventilation holes are clear.
  • Page 45 D-97297 Waldbüttelbrunn Germany Transport declares that the product Product category: Control unit Safety Name of product: MA 4Port Node / MA 4Port Node onPC instructions Safety and complies with the following product specifications: environmet Safety: EN60065, EN60950-1 EMV (EMC): EN55103-1 :2009 (E1)
  • Page 46 The new signature console of MA Lighting is the grandMA2 full-size. It controls all kinds of lighting genres like conventionals, moving lights, LEDs, video and media. Equipped with the most up-to-date technology and even some special tools (e.g. keyboard drawer or multi-touch command screen) the grandMA2 full-size is at home in all lighting segments.
  • Page 47 Gerätetyp / model:………MA 4Port Node………….. Optionen / options:……………………………………………. Seriennummer / serial number:……………………………. Baujahr / year of manufacture:…………………………… Distributor:...
  • Page 48 Notizen/notes:……………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… …………………………………………………………………………………………………...
  • Page 49 Änderungen ohne vorherige Ankündigungen möglich. Keine Haftung bei Fehlern oder Ungenauigkeiten in diesem Booklet. Without having any written permission from MA Lighting Technology GmbH it is not allowed to copy, reproduce or publish any part of this booklet, neither in printed form nor by photos or electronic media.

Table of Contents