MA lighting SCANCOMMANDER User Manual page 69

Scancommander Scancommander Scancommander Scancommander Scancommander
Selecting a section for
backup operation
Save data to card
Load data from card
Deleting a file on card
!! ATTENTION !!
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander
ALL
PRESET
(86254)
(16210)
MACROS
TEST 1
(512)
10.10.58
FORMAT
WRITE : ENABLED
FILES:
DELETE
FREE:
SAVE
ALL / PRESET / MEMORY / SEQUENCE /
SMPTE / SETUP
SAVE
ENCODER 1
OK.
LOAD - Encoder 1 - OK
DELETE
Encoder 1
OK.
ATTENTION: The cue cards work with a battery which has to be mounted
before the first use. Average lifetime of these batteries is two years. Note the
date of inserting the battery on the backside of the card and exchange the
battery in time, otherwise all programs on card get lost.
Change battery only while card is inserted - the card is supplied
meanwhile by the desk. All shows will get lost, when you remove the
battery from the card, while the card is not inserted in the
Insert the card in the desk. Release the locking device of the Battery carrier
and remove only the battery carrier. Attatch a new battery to the carrier (pay
attention to the polarity + / -) and insert the carrier with the new battery in the
card. Move the locking device in direction of the arrow ("Lock")
The type of battery varies from manufacturer to manufacturer - whether you
find a type identification on the card or remove the battery - while card is
inserted - and identify the type of battery.
Please remove the card from the desk as long as the card is not in use.
MEMORY
(34556)
256 K
01 / 19 / 93
2
(124233)
Selects the section to be stored or loaded. The
according block is displayed inverted.
Scrolls through the list of files on card, available for
the selected data type. ("......" offers to create a new
file, to be named via keyboard.)
Saves the selected data section into the card with
name, time and date of storing.
Loads all data of the selected file into the boards
internal storage register and therefore overwrites the
data, already stored in the desk.
Selection of one of the files on card
Deletes the file on card.
SEQUENCE
(512)
SMPTE
(512)
SETUP
(5120)
USER SCAN
1536
LOAD
desk.
69 69 69 69
69