MA lighting grandMA3 User Manual

Midi remotes

Hide thumbs Also See for grandMA3:

grandMA3 User Manual – Remote In and Out

Version 1.5 – 2021-10-26

English

MIDI Remotes

The MIDI Remotes tab is used to define actions for incoming MIDI notes or MIDI Control Changes (CC).

To learn more about the hardware part of the input, read the Connect MIDI topic.

To set the MIDI Offset, open the Output configuration menu:

Output configuration menu with a console and an onPC

Access the menu by pressing the

-OR-

Use the command line to open the menu:

User name[Fixture]> Menu "OutputConfig"

Phone +49 5251 688865-30 - tech.support@malighting.com - www.malighting.com

key and then tap

Output Configuration

1 of 4

Table of Contents

Do you have a question about the grandMA3 and is the answer not in the manual?

Page 1 Output Configuration -OR- Use the command line to open the menu: User name[Fixture]> Menu "OutputConfig" © 2021 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany 1 of 4 Phone +49 5251 688865-30 - tech.support@malighting.com - www.malighting.com...
Page 2 To learn more about the general DC Remotes settings like Name, Enabled, Fader, or Key read the Remote In and Out topic. © 2021 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany 2 of 4 Phone +49 5251 688865-30 - tech.support@malighting.com - www.malighting.com...
Page 3 The MIDI index value is the MIDI note or the MIDI control change number, depending on the set MIDI type. The MIDI receiver must use the same MIDI index value as the MIDI sender to understand each other. © 2021 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany 3 of 4...
Page 4 Note Attack Decay : together with the MIDI note, the Attack and Decay of the MIDI Note will be used. © 2021 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany 4 of 4 Phone +49 5251 688865-30 - tech.support@malighting.com - www.malighting.com...