Table of Contents
Advertisement
ON/OFF MAGNETIC POWER SWITCH
This saw is equiped with a MAGNETIC SAFETY SWITCH
located on the control box, designed to protect the unit
and the user from power surges, power outages and
unwanted or unintentional start-up.
The switch assembly is equipped with a GREEN "START"
button A and a RED spring loaded "STOP" button B.
Once the RED "STOP" button has been pressed, the
machine can only be started by turning the BLACK
inner part of the button to the right C to release the stop
button.
BLADE HEIGHT & TILT ADJUSTMENT
BLADE HEIGHT ADJUSTMENT
The blade height adjustment handwheel A is located on
the front of the saw, and there is a lock knob B on the
handwheel that allows you to lock the wheel and secure
the blade at the desired height.
To raise or lower the blade:
1. Loosen the blade height lock knob B by turning
counterclockwise.
2. To raise the blade: turn the handwheel clockwise.
To lower the blade: turn the handwheel counter-
clockwise.
3. With the blade set to the desired height, tighten the
lock knob to lock the blade.
TO LIMIT YOUR EXPOSURE TO THE BLADE AND ALSO TO MAXIMISE THE EFFECTIVENESS OF THE ANTI-KICKBACK
1/4"
PAWLS (WHEN USING THE RIVING STYLE SPLITTER & BLADE GUARD), NEVER TAKE MORE BLADE HEIGHT THAN
IS REQUIRED TO COMPLETE THE CUT. WHEN SETTING THE BLADE HEIGHT FOR THROUGH-CUTS (CUTS ALL THE
WAY THROUGH THE THICKNESS OF A BOARD) SET THE HEIGHT OF THE BLADE TO ROUGHLY 1/4" HIGHER
1/4"
THAN THE THICKNESS OF THE BOARD.
BLADE TILT (BEVEL) ADJUSTMENT
The blade tilt (bevel) adjustment handwheel C is located
on the right side of the saw and there is a lock knob D on
the handwheel that allows the user to lock the tilting mech-
anism and secure the blade at the desired angle
To change the angle of the blade:
1. Loosen the lock knob D by turning it counterclock-
wise.
2. Turn the handwheel C left or right as required to set the
blade to the desired angle. The blade can be tilted to
the left anywhere from 0° (90° to the table) to 45°.
3. With the blade tilted to the desired angle, tighten the
lock knob D by turning it clockwise to lock the tilting
mechanism and secure the blade at the desired angle.
A
B
B
A
C
C
MAGNETIC SWITCH
DÉMARREUR MAGNÉTIQUE
D
15
Hide quick links:
Advertisement
Table of Contents
